Filter
Top Products
CHAPTER 4: Installing Components
54
12 Tighten the two system board thumbscrews you loosened in Step 8.
13 Connect the cables you removed in Step 7
14 Install the memory by following the instructions in “Installing memory” on page 36.
15 Install the processor and heatsink by following the instructions in “Replacing or adding a
processor” on page 43.
16 Reinstall the PCI riser assembly by following the instructions in “Installing and removing PCI
expansion cards” on page 39.
17 Reinstall the system fans and fan cage by following the instructions in “Replacing system
fans” on page 41.
18 Follow the instructions in “Closing the server case” on page 30.
19 Turn on your server, then press F2 at any time after you see the LEDs on your keyboard flash
or turn off. The BIOS Setup utility opens.
20 Check BIOS settings to make sure that they detect the server’s new hardware, then save your
changes (if any) and close the BIOS Setup utility.
21 If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see “Getting Help” on page 8.