Filter
Top Products
hp fax 1240 series
chapter 4
54
copy
make multiple copies of the same original
1 Load your original face down and top first in the document feeder tray.
For more information, see load originals on page 15.
2 Press Copy until Number of Copies appears in the top line of the display.
3 Press ! or use the keypad to enter the number of copies, up to the
maximum.
(The maximum number of copies varies by model.)
Tip: If you hold down either of the arrow buttons, the number of
copies changes by increments of 5 to make it easier to set a large
number of copies.
4 Press Start Black or Start Color.
If you are copying a stack of originals in the document feeder tray, the
HP Fax makes multiple copies of a single page before copying the next
page. You will need to sort and staple the copies yourself.
copy a washed-out original
Use Lighter/Darker to adjust the lightness and darkness of the copies you make.
1 Load your original face down and top first in the document feeder tray.
For more information, see load originals on page 15.
2 Press Copy until Lighter/Darker appears in the top line of the display.
The range of Lighter/Darker values appears as circles on a scale on the
front panel display.
3 Press ! to darken the copy.
Note: You can also press " to lighten the copy.
4 Press Copy until Color Intensity appears in the top line of the display.
The range of Color Intensity values appears as circles on a scale on the
front panel display.
5 Press ! to make the image more vivid.
Note: You can also press " to make the image more pale.
6 Press Start Color or Start Black.