HP (Hewlett-Packard) 3000 Printer User Manual


 
8-30 ENWW
To clear jams in Tray 1
1 Remove all media from Tray 1.
2 Pull out Tray 1 and place it on a flat surface. Remove any wrinkled
or curled media from the tray.
3 Grasp any jammed or torn media by both corners and pull up and
out of the printer. Reinsert Tray 1.
4 Load media in Tray 1. Check that the media is loaded properly. For
more information on loading media in Tray 1, see Loading Tray 1.
5 Press (help button) to clear the message in the LCD control
panel, and then press (select button) to continue printing.
Jam recovery
The printer automatically provides jam recovery, a feature that allows
you to set whether the printer should attempt to automatically reprint
jammed pages. The options are as follows:
z AUTO. Printer will attempt to reprint jammed pages when sufficient
memory is available. This is the default setting for the printer.
z OFF. Printer will not attempt to reprint jammed pages.
z ON. Printer will reprint any jammed page. Additional printer memory
is required for this setting, so if additional memory is not installed,
overall printer performance may suffer.