Filter
Top Products
3-6 ENWW
Step 2: Verify that the printer works
1 Reconnect the power cord and turn on the printer.
2 Print a Configuration page.
a Press (select button) on the LCD control panel.
b Press (down arrow button) to highlight
INFORMATION, and
then press (select button)
.
c Press (down arrow button) to highlight PRINT
CONFIGURATION
, and then press (select button) to print the
configuration page.
Note Because you have installed an HP Jetdirect print server, two
configuration pages print. The HP Jetdirect Configuration page
contains setup information (for example, LAN HW ADDRESS) that
might be needed for the next step.
If the Configuration page does not print, uninstall and reinstall the
print server card to ensure that it is completely seated in the slot.