Filter
Top Products
ENWW B-15
41.3 UNEXPECTED
SIZE IN TRAY XX
Error An incorrect media size is loaded in Tray XX.
Check that the media loaded in the tray
matches the size setting in the LCD control
panel. See “To set media size and type in the
LCD control panel” for more information.
41.5 UNEXPECTED
TYPE IN TRAY XX
Error An incorrect media type is loaded in Tray XX.
Check that the media loaded in the tray
matches the type setting in the LCD control
panel. See “To set media size and type in the
LCD control panel” for more information.
55.X PRINTER ERROR
Error The engine is not communicating with
the formatter.
68.X PERMANENT
STORAGE ERROR
Error One or more printer settings saved in the
non-volatile storage device is invalid and has
been reset to its factory default. Printing can
continue, but there may be some unexpected
behaviors because an error occurred in
permanent storage. Press
(select button) to
clear the message.
X is:
0 for onboard NVRAM
1 for removable disk (flash or hard)
68.X PERMANENT
STORAGE FULL
Error A non-volatile storage device is full. Printing
can continue, but there may be some
unexpected behaviors because an error
occurred in permanent storage. Press
(select button) to clear the message.
X is:
0 for onboard NVRAM
1 for removable disk (flash or hard)
68.X PERM. STORAGE
WRITE FAIL
Error A non-volatile storage device is failing to write.
Printing can continue, but there may be some
unexpected behaviors because an error
occurred in permanent storage. Press
(select button) to clear the message.
X is:
0 for onboard NVRAM
1 for removable disk (flash or hard)
49.XXXXX PRINTER
ERROR
Critical error A critical firmware error has occurred.
Press and hold
(power button) to turn off
the printer, and then turn it back on to clear
the error.
Message Type Description