Diagnostics 163
o
Example: q57diag.exe -bus 5
Program tests UUTs on bus 5
• -dpmi
o Specifies the use of DPMI memory allocation
o Uses DPMI memory allocation method to allocate memory instead of malloc() or free().
• -dir
o Displays the version of the IPMI (Intelligent Platform Management Interface)
• -errctrl <c>
Specifies action on error -> a:abort, w:wait, l:loop, c:continue, s:skip
• -com <value>
Enables com port value (1..4)
• -ems <size>
Specifies external memory size in HEX to tst
• -ref
Runs test with reference device
• -findref
Detects reference device
• -fmac
Enables input of Mac address from a file
• -lbm <n>
Sets Mac loopback packets
• -lbp <n>
Sets Phy loopback packets
• -lbe <n:n:n>
o Sets external loopback packets
o Format: <1000Mbps:100Mbps:10Mbps>
• -mba <value>
o Enables/disables MBA
o Value = 0 to disable; Value = 1 to enable
• -mbap <value>
o Selects MBA protocol
o Value = 0 for PXE; Value = 1 for RPL; Value = 2 for BootP
• -mbas <value>
o Selects MBA speed
o Value = 0 for auto; Value = 1 for 10HD; Value = 2 for 10FD; Value = 3 for 100HD; Value = 4
for 100FD; Value = 6 for 1000FD (fiber)
• -firm <file>
Updates device eeprom based on <file> image match