Filter
Top Products
Installation 44
This counter indicates the number of receive packets with CRC errors. Packets less than 64 bytes are
not counted in this counter.
• Tx Threshold
This counter indicates the current value of the Early Transmit Threshold. The adapter starts
transmitting the packet when the specified number of quad-words has been DMAed in from memory.
• Current IFS Value
This counter indicates the current value of Inter Frame Spacing between back-to-back transmits.
• Jumbo Frames Received
This counter indicates the number of jumbo packets received (packets greater than 1514 in length).
• Jumbo Frames Transmitted
This counter indicates the number of jumbo packets transmitted (packets that are greater than 1514
in length).
• PCI-X mode (0=PCI, 1=PCI-X)
This counter indicates whether the adapter is in a PCI.
CPQANS custom counters
• Number of Tx ECBs Queued in Members
This counter indicates the number of packets (Event Control Blocks) that are queued in team members
for transmission.
• Number of Tx ECBs Queued in Unavailable ECBs Queue
This counter indicates the number of transmit packets (Event Control Blocks) that are currently in the
CPQANS transmit queue.
• Total Enqueued Tx Due to No Available ECBs
This counter indicates the number of transmit packets that were queued due to no available ECBs.
• Number of Probes Sent by All Team Members
This counter indicates the number of probe packets sent by all team members.
• Number of Probes Received by All Team Members
This counter indicates the number of probe packets received by all team members.
Advanced Network Services help - supported keywords
• AGG_SELECTION
o Syntax: AGG_SELECTION=[BANDWIDTH | COUNT]
o Description: Sets active aggregator selection mode by bandwidth or count
• BALANCE_INTERVAL
o Syntax: balance_interval=nnn
o Description: Changes Balance interval, nnn counts 1/18 sec
• BALANCE_SET_DEFAULT
o Syntax: balance_set_default
o Description: Restores Balance interval to factory settings
• COMMIT
o Syntax: commit [team=nnn]