Filter
Top Products
Installation 45
o
Description: Sets a certain mode. Use after binding to base drivers with Team=nnn.
• DELAY
o Syntax: delay=nnn
o Description: Delays the commit in nnn seconds
• FRAME
o Syntax: frame=[ETHERNET_802.2 | ETHERNET_802.3 | ETHERNET_II | ETHERNET_SNAP]
• HELP
o Syntax: -H
o Description: Displays Help
o Example: CPQANS -H
• JOIN_INDIVIDUALS
o Syntax: join_individuals=[yes | no]
o Description: Joins all individual links to one aggregator
• LBN
o Syntax: Reset LBN=nnn
o Example: cpqans reset lbn=nnn
o Description: Resets the logical board number (LBN) of a bound adapter. Supported only after
commit command. Default value = 0
• MAX_TX_QUEUE
o Syntax: max_tx_queue=nnn
o Description: Sets the Max number of TX ECBs queued for send
• MODE
o Syntax: mode=[NFT | ALB | FEC | GEC | 802.3AD]
• NAME
o Syntax: name=[any unique name]
o Description: Sets a unique name
• PRIMARY
o Syntax: primary | secondary
o Description: Identifies the primary adapter. Supported only in BIND command
• PROBE_BURST_SIZE
o Syntax: probe_burst_size=nnn
o Description: Changes number of probes to send in a retry
• PROBE_CHECK_INTERVAL
o Syntax: probe_check_interval=nnn
o Description: Changes probes check interval
• PROBE_RECHECK_INTERVAL
o Syntax: probe_recheck_interval=nnn
o Description: Changes probe retries check interval