Filter
Top Products
HP OmniBook 7100 Troubleshooting and Diagnostics 3-23
Serial Port Sets how the serial port is configured by the BIOS (specified
or automatic).
Enabled
Base I/O address Sets the I/O address and interrupt. 3F8h, IRQ4
Infrared Port Sets how the infrared port is configured by the BIOS (specified
or automatic).
Disabled
Mode Sets the hardware to support SIR (Standard IR), ASK IR
(amplitude shift keyed IR), or FIR (Fast IR) infrared
communications. (Driver installation required.)
SIR
Base I/O address Sets the I/O address and interrupt. 2F8h, IRQ3
DMA channel For Fast IR mode, sets the DMA channel. DMA3
Front/Back Sets which infrared port is active. Back
Parallel Port Sets how the parallel port is configured by the BIOS (specified
or automatic).
Enabled
Mode Sets the port to normal, bi-directional, EPP, or ECP. ECP
Base I/O address Sets the I/O address. 378h
Interrupt Sets the interrupt. IRQ7
DMA channel For ECP mode, sets the DMA channel. DMA3
Audio Sets how the audio system is configured by the BIOS
(specified or automatic).
Enabled
SB I/O address Sets the Sound Blaster I/O address. 220h
WSS I/O address Sets the Windows Sound System I/O address. 530h
AdLib I/O address Sets the AdLib synthesizer I/O address. 388h
Interrupt Sets the interrupt. IRQ5
1st DMA channel Sets the DMA channel for playback. DMA1
2nd DMA channel Sets the DMA channel for recording. DMA0
MPU Device Sets how the MIDI capability (hardware wavetable) is
configured by the BIOS (specified or automatic).
Disabled
MPU I/O address Sets the MIDI I/O address. 330h
Interrupt Sets the interrupt. IRQ11
Security Menu Default
User Password Is Shows if a user password is set. Clear
Administrator Password Is Shows if an administrator password is set. Clear
Set User Password Press ENTER to set, change, or clear user password.
Password length can be no longer than 8 characters, 0-9, A-Z.
Set Administrator
Password
Press ENTER to set, change, or clear administrator password.
This password protects BIOS Setup settings.
Boot Sets whether a user password is required when the computer
boots.
Enabled
Resume If boot security is enabled, sets whether a user password is
required when resuming from a suspended state.
Enabled
Undock If boot security is enabled, sets whether a user password is
required when undocking the OmniBook.
Disabled
Hard Disk Drive Lock If boot security is enabled, sets whether a password is stored
on the hard disk. Secures data on the disk if the disk is moved
to another computer.
Disabled
Floppy Boot Sets whether the floppy drive is a boot device. Enabled
Power Menu Default
Power Management Mode Disables time-outs, selects a combination of time-outs, or
allows customized time-outs.
Max Power
Savings
Smart CPU Mode Enables automatic CPU power savings. Absence of keyboard,
mouse, and hard disk activity could cause slower CPU
response.
Off
Standby Time-out Sets the period of inactivity after which the computer goes
from On to Standby power mode.
2 minutes