Filter
Top Products
To connect the interface cable
and power cords for a printer
with an optional tray 4
Note
Make sure that the printer is off (power
button out) before attaching the interface
cable and connecting the power cords.
1 Locate the interface cable (A), the
power pack (B), and the straight
power cord (C).
Note
The interface cable (A) might already be
attached to the printer and tray 4. If it is,
proceed to step 4 below; otherwise,
continue with step 2.
2 Attach the end of the interface cable
that is marked with one dot to the
printer above the parallel connector.
3 Attach the other end of the interface
cable (marked with two dots) to the
connector on tray 4 that is marked
with two dots.
4 Attach the power pack to the back of
the printer by inserting the clip into
the space between the printer and tray
4.
10 Step 3: Installing the Cables EN