Filter
Top Products
9 Roll the printer to its permanent
location, where all four wheels rest on
a level floor surface, and stabilize it
by pushing the locking tabs on the
tray’s wheels to the locked position.
10 Rotate the feet of the five stabilizing
legs and the anti-tip foot (on the left
side of the tray) until they are snug
against the floor.
WARNING!
An unstable printer can tip over and cause
injury; make sure that the printer is
secured properly.
11 Plug the male end of the power cord
into a surge protector or other
grounded power source.
Note
If an optional multi-bin mailbox was
ordered, see the installation guide
included with the mailbox for installation
instructions.
12 Step 3: Installing the Cables EN