Filter
Top Products
9 Make sure that the media-size tab on
the front of the tray is set to the
correct media size.
10 Slide the tray back into the printer.
11 Attach the left output bin (A) to the
left side of the printer if you did not
install an optional multi-bin mailbox.
If necessary, adjust the media stop
guide (B) on the top output bin for
media sizes larger than letter or A4.
12 Repeat steps 1 through 10 to load
media into tray 3.
Set the media type for trays 2 and 3 in the
printer control panel. For instructions, see
“Step 8: Configuring Input Trays.”
Note
Always configure the media type in the
printer control panel to prevent users from
printing on the wrong media type.
EN Step 7: Loading the Input Trays 27