HP (Hewlett-Packard) 8500 Printer User Manual


 
Step 12: IBM LAN Network Installation
Installing the Printer Software for IBM LAN
Server 4.x
For IBM LAN Server 4.x networks, install the software on workstations
or on the server.
To install IBM LAN Server printer software for system
administrators
1 Verify the system requirements by referring to the HP JetDirect Print
Server Software Installation Guide.
2 Quit all applications.
3 Insert the CD-ROM into the CD-ROM drive.
4 Display the OS/2 command window by completing the following steps:
a Double-click OS/2 System.
b Double-click Command Prompts.
c Double-click OS/2 Window.
5 At the OS/2 command prompt, select the CD-ROM drive, the
\OS2\Jetadmin\directory, and the subdirectory for the language you want.
6 Copy the software to the computer’s hard drive and extract the files.
Note The following instructions assume you chose the
\OS2\Jetadmin\English\ subdirectory.
7 Use the Jetinst command to start the installation of JetAdmin for OS/2:
Jetinst <sourcedrive:> <bootdrive:> <option>
where
<sourcedrive:> points to a directory containing these install files
<bootdrive:> is the OS/2 boot partition where you want this software
<option> is HP to install as a print server (default)
- Or -
CLIENT to install as a client
For example, from the [D:\OS2\Jetadmin\English>] prompt, you might
enter: Jetinst D: C: HP
8 Wait for the system to respond and then follow the instructions on the
screen.
Note Pmspl.dll must be a version dated September 23, 1996, or later.
EN Step 12: IBM LAN Network Installation 43