Filter
Top Products
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
2. Touch Scan.
The Scan Menu appears.
3. Touch Scan to Computer.
4. If the HP All-in-One is connected directly to a computer with a USB cable, proceed
to step 6.
5. If the HP All-in-One is connected to one or more computers on a network, do the
following:
a. The Select Computer menu appears.
b. A list of the computers connected to the HP All-in-One appears on the display.
c. Touch the required destination computer name.
NOTE: The Select Computer menu might list computers with a USB
connection in addition to those connected through the network.
6. The Scan To menu appears on the display, listing the applications on the computer.
7. Touch the appropriate computer application.
A preview image of the scan appears on your computer, where you can edit it.
8. Make any edits to the preview image, and then click Accept when you are finished.
Scan an original to a memory card or storage device
You can send the scanned image as a JPEG image to the memory card that is currently
inserted or a storage device that is currently attached to the front USB port. This enables
you to use the photo print options to print borderless prints and album pages from the
scanned image.
NOTE: If the HP All-in-One is connected to a network, you can access the scanned
image only if the card or device is being shared across the network.
To save a scan to a memory card or a memory device.
1. Make sure that either a memory card is inserted into the appropriate slot or a storage
device is attached to the front USB port on the HP All-in-One.
2. Load your original print side down on the right front corner of the glass.
3. Touch Scan.
The Scan Menu appears.
4. Touch Scan to Memory Device.
The HP All-in-One scans the image and saves the file to the memory card or the
storage device in the JPEG format.
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press Start Copy Black or Start Copy Color to begin copying.
Make a copy 25
Use the HP All-in-One features