HP (Hewlett-Packard) CQ140A#B1H Printer User Manual


 
Sync the HP eStation Zeen and the main printer to the same wireless network
When both the HP eStation Zeen and the main printer are in range of the same wireless network, they can both be
connected to it, and can communicate with each other through that network.
To sync them, touch Sync Networks in the Wireless Settings screen.
Delete a wireless network from the list of available networks
To remove a wireless network, touch the name in the list of available networks under the Wi-Fi Networks area, then
touch Forget.
View the battery power status
Look at the Power area on the System Dashboard screen. The battery power is shown as a percentage of the full
capacity. Touch Status on the right side of the Power area to see more details.
NOTE: It takes about 2 hours to fully charge the battery from the 0% power state. The battery can be re-charged
by docking it into the main printer, or connecting an AC charger (must be purchased separately).
Printer maintenance settings
To display the Printer Maintenance screen, touch Printer Settings, located to the right of the Estimated Ink Levels
area in the System Dashboard.
Use the settings in the Printer Maintenance screen to check estimated ink levels, get supply information, print
reports, and perform printer maintenance when necessary.
View estimated ink levels
To view the estimated ink levels in the System Dashboard screen, the HP eStation Zeen must be docked into the
main printer. Bar graphs show the approximate amount of ink available in each printer cartridge.
Display Supplies Shopping Information
Touch Supplies Shopping Information in the Printer Maintenance screen.
Print the Printer Status Report
Touch Printer Status Report in the Printer Maintenance screen.
Print the Print Quality Report
Touch Print Quality Report in the Printer Maintenance screen.
Web Services settings
Enable Web Services to use ePrint and some of your Print Apps
1. Touch Web Services to enable ePrint. A Terms of Use window appears.
2. Touch Yes to accept the Terms of Use and enable Web Services.
Check SD card and internal storage status
You can monitor the internal storage and SD card capacity of the HP Zeen. The available storage is displayed under
the SD Card & Internal Storage area in the System Dashboard screen.
Adjust the media and printer volumes
Volume controls are located under the Quick Settings area of the System Dashboard screen.
HP Photosmart eStation C510 series - Use the Removable Display 17
Online Topics