Filter
Top Products
c. Use a fresh, lightly-dampened, lint-free cloth to wipe the plastic ramps on both sides of the nozzles. Wipe
away from the nozzles.
d. Wipe the previously cleaned areas dry with a dry lint-free cloth before proceeding to the next step.
8. Make sure the latch handle is raised, and then reinsert the printhead.
9. Carefully lower the latch handle.
NOTE: Make sure you lower the latch handle before reinserting the ink cartridges. Leaving the latch handle
raised can result in incorrectly seated ink cartridges and problems printing. The latch must remain down in
order to correctly install the ink cartridges.
Chapter 1
50 Online Topics
Online Topics