Filter
Top Products
Preparing to print
1 Raise the Out tray, and then remove all paper from the In tray.
2 Slide the paper guide all the way to the left.
3 Place the transparencies in the In tray.
The side to be printed on should face down and the adhesive strip should face up
and toward the printer.
4 Carefully push the transparencies into the printer until they stop, so that none of the
adhesive strips catch on one another.
5 Slide the paper guide firmly against the edge of the transparencies.
6 Lower the Out tray.
Printing
1 Open the Printer Properties dialog box.
2 On the Printing Shortcuts tab, select Presentation printing, and then specify the
following print settings:
– Paper size: An appropriate paper size
– Paper type: Automatic or an appropriate transparency film
3 Select any other print settings that you want, and then click OK.
Use the What’s This? help to learn about the features that appear on the Printer
Properties dialog box.
Labels
● Guidelines
● Preparing to print
● Printing
Guidelines
● Use only paper, plastic, or clear labels that are designed specifically for inkjet
printers.
● Use only full sheets of labels.
● Avoid using labels that are sticky, wrinkled, or pulling away from the protective
backing.
● Do not exceed the In tray capacity: 20 sheets of labels (use only Letter or A4-size
sheets).
Chapter 6
34 HP Deskjet 5700 Series