HP (Hewlett-Packard) 5700 Series Printer User Manual


 
6 Remove the replacement print cartridge from its packaging and carefully remove
the plastic tape.
Caution Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical
connections. Do not remove the copper strips. They are required electrical
contacts.
7 Hold the print cartridge so that the copper strips are on the bottom and facing
toward the printer.
8 Slide the print cartridge at a slight upward angle into the cradle until the cartridge
snaps into place.
9 Close the printer cover.
The printer automatically prints a calibration page.
For information about storing print cartridges, see Storing print cartridges.
For information about recycling empty print cartridges, see Print cartridge recovery.
Warning Keep both new and used print cartridges out of the reach of children.
Setting the auto-on and auto-off feature
Auto-on
Auto-off
Chapter 9
62 HP Deskjet 5700 Series