Filter
Top Products
Error messages
● Out-of-paper message
● Other error messages
Out-of-paper message
● If the In tray contains paper
● If the In tray is empty
If the In tray contains paper
1 Verify the following:
– A sufficient amount of paper is in the In tray (at least ten sheets).
– The In tray is not overly full.
– The paper stack is touching the back of the In tray.
2 Slide the paper guide so it fits firmly against the edge of the paper.
3 Press the Resume button to continue printing.
If the In tray is empty
1 Load paper in the tray.
2 Press the Resume button to continue printing.
Other error messages
● “There was an error writing to USB port”
● “There was an error writing to LPT1”
● “Two-way communication cannot be established” or “Printer not responding”
“There was an error writing to USB port”
The printer might not be receiving correct data from another USB device or USB hub.
Connect the printer directly to the USB port on the computer.
“There was an error writing to LPT1”
The USB cable might not have been attached before installing the printer software.
Chapter 10
82 HP Deskjet 5700 Series