Filter
Top Products
Preparing to print
1. Verify that the printer is turned on.
2. Raise the Out tray, and then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, then pull out the paper-length
guide.
4. Place the transparencies in the In tray, with the side to printed on facing down
and the adhesive strip facing up and toward the printer.
5. Carefully push the transparencies into the printer until they stop so that none
of the adhesive strips catch on one another.
6. Slide the paper guides firmly against the paper.
7. Lower the Out tray.
Printing
1. If necessary, open the Page Setup dialog box and set the paper size, scaling,
or orientation options.
2. Open the Print dialog box.
3. Select the General panel, and in the Paper Source drop-down list, click Upper
tray.
4. Select the Paper Type/Quality panel, and then specify the following settings:
• Paper Type: The appropriate transparency film type
• Print Quality: Normal or Best
5. Select any other print settings that you want, and then click Print.
8.9 Labels
Guidelines
• Use only labels that are designed specifically for inkjet printers.
• Use only full sheets of labels.
HP Deskjet 6600 series printer User's Guide
66