Filter
Top Products
To load photo paper in the input tray
1. Remove all paper from the input tray.
2. Insert the stack of photo paper into the far-right side of the input tray with the print
side or glossy side down and short edge forward. Slide the stack of photo paper
toward the product until it stops.
TIP: For more help on loading small-size photo paper, refer to the guides
engraved in the base of the input tray for loading photo paper.
3. Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the input tray; make sure the stack of paper fits within the input tray
and is no higher than the top of the paper-width guide.
For best results, set the paper type before copying or printing.
Related topics
•
Recommended papers for printing and copying
•
View the print resolution
•
Set the copy paper type
Load index cards
You can load index cards into the input tray of the HP All-in-One to print notes, recipes,
and other text.
For best results, set the paper type before copying or printing.
NOTE: The HP All-in-One leaves a 1.2 cm (0.5 inch) border on one short edge.
Before printing many cards, print one test card to make sure that the border does not
crop your text.
Load paper 27
Load originals and load paper