Filter
Top Products
Duplex copying and printing 31
Layout options for duplexing
The four available duplexing orientation options are shown below. These options can be
selected in the printer driver, through the Copy Settings screen, or by selecting the
BINDING option from the Printing menu at the control panel.
Note For the binding options designated with an asterisk (*) in the diagram above:
When using Windows drivers, select Flip Pages Up.
When making copies, select the 2 - Flipped option on the Copy Settings screen.
1 Long-edge portrait This is the default product setting and the most common
layout used. Every printed image is oriented right-side up.
Facing pages are read from top to bottom on the left page,
then from top to bottom on the right page.
2 Long-edge
landscape
This layout is often used in accounting, data processing,
and spreadsheet programs. Every other image is oriented
upside down. Facing pages are read continuously from
top to bottom.
3 Short-edge portrait This layout is often used with clipboards. Every other
printed image is oriented upside down. Facing pages are
read continuously from top to bottom.
4 Short-edge
landscape
Each printed image is oriented right-side up. Facing
pages are read from top to bottom on the left page, then
from top to bottom on the right page.
4. Short-edge landscape
3. Short-edge
portrait*
2. Long-edge
landscape*
1. Long-edge
portrait