Filter
Top Products
Serial/Telnet User Interface
115Network Storage Router N1200 User Guide
Note: A target ID must be defined in the SCSI Configuration to add devices.
3. In the Device List, to add a device to the map, enter the number from the
“Num” column.
If the selected device is already mapped, an error message will appear,
warning about adding a duplicate device.
Note: If a device with LUN = “-‘ is selected, all LUNs for this Target will be added to the
map.
Creating a Map Entry for a Fibre Channel Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note: All essential information about the device must be known.
A series of questions is displayed. The questions will vary based on the “Current”
map protocol. Required information includes the LUN address, protocol, port,
device name, and device type (see Figure 61).
Figure 61: Creating a Map Entry for a Fibre Channel map