Filter
Top Products
Visual Manager User Interface
71Network Storage Router N1200 User Guide
Viewing and Changing SCSI Map Information
To view or change current SCSI map host information:
1. In the Mapping Menu screen, select the desired SCSI bus.
2. Select Edit/View in the Map section of the screen.
The SCSI Map dialog box is displayed. Current map information is shown at
the top of the dialog box.
3. Enter the new settings and then click the appropriate action button
(see Figure 31).
Figure 31: SCSI Map dialog box
Note: To map Fibre Channel devices to any SCSI initiator on the selected bus, a Target
ID must be enabled from the SCSI Bus Configuration Menu. A Target ID should only be
added if there is a SCSI initiator that needs to address Fibre Channel devices. Each
Target ID can be used to store up to 32 Fibre Channel devices.
Note: Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have
entries deleted.
Note: Map settings are saved to memory when any button within the page is selected.