Filter
Top Products
Visual Manager User Interface
59Network Storage Router N1200 User Guide
SCSI Bus Configuration
When a SCSI bus is selected in the Ports Menu, the SCSI Bus Configuration
screen is displayed (see Figure 24).
Figure 24: SCSI Bus Configuration screen
SCSI bus configuration settings:
■ Primary Initiator ID (default: 7) must be a unique ID.
■ Alternate Initiator ID (service mode-restricted access) (default: none) will
be used if the primary ID is taken. Must be a unique ID.
■ Target ID(s) adds or removes Target IDs.
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
Note: Target IDs must be setup prior to mapping devices on the SCSI bus.