Filter
Top Products
Serial/Telnet User Interface
140 Network Storage Router N1200 User Guide
■ 4) Clear current trace buffer clears the current trace buffer.
■ 5) Clear (flash) assert trace buffer clears the assertion failure trace buffer.
Saving Copies of the Trace Buffers using FTP
Using an FTP session, the trace buffers from the router can be copied and saved.
1. Verify the router is connected to the Ethernet network.
2. Start an FTP session.
3. Enter the router IP address at the FTP prompt:
ftp <IP address>
Note: Initially, the factory default router IP address is 1.1.1.1. To view the current IP
address, navigate to the Ethernet Configuration Menu and view the screen display. See
the “Configuration Menu” section for information on viewing and changing the router
IP address.
4. Specify the directory location on the computer or network where the FTP
program will store the trace file.
5. Enter the user name and password.
The factory default user name is
root and the default password is password.
6. Specify Bin mode:
bin
7. Enter the appropriate command to copy the current or previous trace buffer:
— To copy the current trace buffer:
get curtrace.txt
— The file will transfer from the router.
— To copy the previous trace buffer:
get prvtrace.txt
— The file will transfer from the router.