Filter
Top Products
Serial/Telnet User Interface
117Network Storage Router N1200 User Guide
Note: If the device being added is a Fibre Channel device, the Node WWN, Port
WWN, and LUN ID must be entered.
Note: If this device is a duplicate of a device currently present in the device list, an error
message will be displayed.
Removing Gaps in the Map
To remove any incremental gaps in the sequence of LUN listed in the table, in the
Edit Map Entries screen, select Remove (R).
As the system removes any gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table in order
to detect all devices.
Deleting a Map Entry
To delete an entry from a map, in the Edit Map Entries screen, select Delete (D).
For Fibre Channel maps, at the prompt, either enter the LUN ID of the LUN to
delete or enter D to delete multiple LUN.
For SCSI maps, at the prompt, enter the Target ID and LUN ID of the LUN to
delete or enter D to delete multiple LUN.
Clearing the Entries from the Current Map
To remove all entries from the Current map, in the Edit Map Entries screen, select
3) Clear Map. A confirmation prompt is displayed.