Filter
Top Products
Visual Manager User Interface
72 Network Storage Router N1200 User Guide
Note: SCSI maps can be filled or devices can be added to them only when at least one
SCSI Target ID has been enabled in the SCSI Bus Configuration Menu.
SCSI Map settings:
■ Clear Map clears all entries from the current map.
■ Fill Map fills in the current map.
When the map is filled, the display shows the current devices.
■ Remove Gaps removes any incremental gaps in the sequence of LUN listed
in the table.
When the system removes gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table to detect
all devices.
■ Delete deletes map entries.
To delete a range of LUNs, select the beginning LUN to delete from the
“from” drop-down box and select the last LUN to delete from the “to”
drop-down box.
■ Discovered Device Entry adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section
of the screen.
■ Manual Device Entry creates a map entry for a device that is not yet
discovered or installed.
To add a new device to the map, use the drop-down boxes to enter the settings,
and then click Create Entry in the Manual Device Entry section of the
screen.