Filter
Top Products
Configuration Overview
29Network Storage Router N1200 User Guide
UI Overview
The router supports the following user interfaces:
■ Visual Manager, page 29
■ Serial, page 29
■ Telnet, page 29
■ FTP, page 29
Visual Manager
Visual Manager lets you view and change router configuration from any standard
Web browser. Information is dynamically generated in an HTML format so that
any web browser can access it.
Unless the default values are used, the 10/100BaseT Ethernet port must be
configured using the serial port with an appropriate IP address, subnet mask, and
gateway prior to use.
For complete information on accessing and using Visual Manager, see “Visual
Manager User Interface” on page 37.
Serial
The serial port allows for configuration of device characteristics from a terminal
or terminal emulator. Multiple serial connections cannot be run at the same time.
For complete information on accessing and using the Serial UI, see “Serial/Telnet
User Interface” on page 87.
Telnet
From most Microsoft® Windows® 9x, Windows NT®, and Windows 2000®
systems, users can start a Telnet session from the DOS (command) shell after the
IP address has been set.
For complete information on accessing and using the Telnet UI, see “Serial/Telnet
User Interface” on page 87.
FTP
The router supports the use of the FTP UI to perform several copy procedures
using the
put and the get commands.