Filter
Top Products
Visual Manager User Interface
39Network Storage Router N1200 User Guide
Visual Manager Access
Visual Manager (VM) can be accessed from any standard web browser:
1. Connect a 10/100BaseT Ethernet cable to the back of the router.
2. Apply power to the connected SCSI and/or Fibre Channel devices.
Wait for all of the devices to complete their power-up routines.
3. Apply power to the router.
4. Apply power to the host computer.
5. Enter the router IP address in the address field of the Web browser of the host
computer.
Note: To access VM, the router must be assigned a valid IP address. The factory default setting
for the IP address allows access on a local area network only. If the factory default for the IP
address is already used by another device on the local network, the IP address must be
changed.
The factory default for the IP address is http://1.1.1.1/
Note: If the IP address of the router is not known or needs to be changed, connect to the router
using a serial connection. The current router IP address is displayed and can be changed in the
serial Ethernet Configuration Menu.
The Visual Manager home page is displayed, showing router status
information. The home page is accessible to anyone who knows the router IP
address.
6. Select the desired menu option to access menus and screens.
The Password dialog box is displayed.