Filter
Top Products
Visual Manager User Interface
64 Network Storage Router N1200 User Guide
Mapping Menu
Each physical port/bus on the router can have the following maps:
Each map has a unique name and map ID; one of the maps must be identified as
the “current” map for the router to use.
Accessed from the Main Menu, the Mapping Menu is used to view and modify
host and map information for a Fibre Channel port or SCSI bus. Maps and hosts
can be added, edited, or deleted.
To view or change map settings of a specific port or bus:
1. Select the port or bus from the menu bar on the left side of the screen or from
the router image at the top of the screen.
2. Specific mapping information is displayed, including the name of the port, the
selected host, and the assigned map.
3. To make changes to the configuration, enter the new value and then select
Submit.
Because some mapping configuration settings are the same for Fibre Channel and
SCSI maps and some settings are unique, this mapping section is subdivided as
follows:
■ Common Fibre Channel and SCSI Mapping Tasks, page 65
■ Fibre Channel Mapping Tasks, page 66
■ SCSI Mapping Tasks, page 70
Table 5: Device Map Types
Map Type System/User Generated Fibre Channel or SCSI
Auto Assigned System Fibre Channel and SCSI
Indexed (default) System Fibre Channel and SCSI
SCC System SCSI
Custom User Fibre Channel and SCSI