Filter
Top Products
Visual Manager User Interface
58 Network Storage Router N1200 User Guide
■ Buffered Tape Queue Depth sets the Buffered Tape Queue Depth.
Select a setting of 0 through 10 from the drop-down list.
■ Default Map (default: indexed) sets the current mapping mode for the
selected port.
The current map can be set to:
— Indexed (default)
— Auto-assigned contains all the SCSI devices that are attached to the
router.
—SCC
For more information about mapping modes, see Appendix C, “Addressing
Methods and Table Structures” on page 169.
For information on changing map settings, see “Mapping Menu” on page 64.
■ Performance Mode (default: 2 Gbps) toggles between 1 Gbps and 2 Gbps.
Note: If set incorrectly and the router is plugged into a Loop or Fabric, the unit may
receive Framing errors due to the incorrect Fibre Channel link speed.
■ Override Settings (service mode-restricted access) enhances interoperability
with some storage devices that require special consideration during setup of
the router configuration menus.
— Hi-Sup Bit toggles between Set and Clear.
— Force FCP Response Code toggles between Off and On for support of
HP-specific HBA #223180-B21 and #120186-001.
— Initiator Bit toggles between Set and Clear.
— When using the router in a router-to-router configuration, this option
should be configured to Set. A router-to-router configuration is a type of
configuration where one router appears as a target to another initiator
router.
— Link Garbage Deletion toggles between Enabled and Disabled.