Filter
Top Products
Serial/Telnet User Interface
124 Network Storage Router N1200 User Guide
Trace and Event Settings Configuration
In the Configuration Menu, choose 5) Trace and Event Settings Configuration
to view and change Trace and Event settings. When this option is selected, the
following menu is displayed (see Figure 70).
Figure 70: Utility Settings (Trace Settings) Menu
Trace Settings Menu options:
■ 1) Trace Settings Configuration configures the trace settings.
■ 2) Event Settings Configuration configures the event settings.
Each of these options is discussed in the following sections.
Configuring Trace Settings
In the Utility Trace Settings Menu, 1) Trace Settings Configuration is used to
modify trace levels. Two pages of trace level settings are displayed. Figure 71 and
Figure 72 on page 125 are illustrations of the two Trace Settings screens.
Note: Trace Settings should not be modified in normal operation; performance
degradation may result.
1. To change any of the settings in these screens, enter the number that
corresponds to the option that needs to be changed.
2. The current setting is toggled to either On or Off.
3. Repeat Step 2 for each setting that needs to be changed in the page.
4. Before leaving the page, activate the new setting by entering U) Update
Current Operating Trace levels.
5. This option forces the currently displayed trace settings to become effective
immediately, without requiring a reboot or power cycle.