Filter
Top Products
Figure 6-34 Inserting the DIMM Into the Connector Socket
6. Replace the memory airflow guide. (See “Removing and Replacing the Memory Airflow
Guide” (page 144).)
7. Replace the top cover.
8. Reconnect the power and external cables and turn on the server.
9. Verify the memory replacement and operation by using the system utilities. (For additional
information, see Appendix B (page 199) or the HP Integrity and HP 9000 iLO MP Operations
Guide.)
• Use the iLO MP commands to verify operation.
• Use the BCH commands to verify operation.
• Use diagnostics provided by the ODE to exercise the newly installed memory.
154 Removing and Replacing Components