HP (Hewlett-Packard) RP3410 Server User Manual


 
IDE Interface
The IDE controller (PCI649) supports the ATAPI zero (0) to five (5) modes (from 16 to 100 MB/s).
The usable speed on this system is limited to 16 MHz (ATA-33 mode, 33 MB/s) because the
slimline CD/DVD devices do not support the ATA-66 and 100 modes.
The primary IDE channel is the only channel that is implemented. The IDE cable provides only
one drive connector, of the master type, for the optical storage peripheral.
1 GB System LAN
The 1 GB System LAN port provides:
Main system LAN
10/100/1000 MB capable
USB Connectors
The USB connectors provide:
High speed 480 MB/seconds capable
Full speed 12 MB/seconds and low speed 1.5 MB/seconds
Support for USB keyboard and mouse
HP-UX supports HP USB keyboard and mouse
Disk and I/O Path Logging
Some failures result in I/O path logging. These paths help to indicate the source of the error and
can be included in the error message or logged into console or event logs.
Table 1-3 describes the disk drive and DVD paths for the server.
Table 1-3 Internal Disk and DVD Paths
ACPI PathLocationFunction Associated with PathSlot
0/1/1/0.0.0Bottom disk slotUltra 3 SCSI I/O for bottom removable diskDisk slot 0
0/1/1/0.1.0Middle disk slotUltra 3 SCSI I/O for middle removable diskDisk slot 1
0/1/1/1.2.0Top disk slotUltra 3 SCSI I/O for top removable diskDisk slot 2
0/0/2/0.0.0DVD slotIDE I/O for DVDDVD slot
Table 1-4 describes the extended core I/O paths for the server.
Table 1-4 Extended Core I/O Paths
ACPI PathLocationFunction Associated with PathSlot
0/0/1/0Rear panel (with
mouse symbol)
USB portCore I/O
Rear panel (top/ white
connector)
0/0/1/0USB portCore I/O
0/0/1/1Rear panel (with
keyboard symbol)
USB portCore I/O
0/0/1/1Rear panel
(bottom/white
connector)
USB portCore I/O
0/0/1/2InternalUSB portCore I/O
0/0/2/0System boardIDE controllerCore I/O
Detailed Server Description 29