Filter
Top Products
1. Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you
face it. This locks the hard drive backplane in place.
2. Screw in the two backplane mounting screws and connect the two SCSI cables.
3. Connect the backplane power cable and lower the fan power bridge until it snaps in place.
4. Replace fans 2 and 3. (See “Removing and Replacing System Fans” (page 136).)
5. Replace the PCI card cage. (See “Replacing the PCI Card Cage” (page 168).)
6. Replace the top cover.
7. Reconnect all the power and external cables.
8. Verify the backplane replacement and operation by using the system utilities. (For additional
information, see Appendix B (page 199) or the HP Integrity and HP 9000 iLO MP Operations
Guide.)
• Use the iLO MP commands to verify operation.
• Use the BCH commands to verify operation.
192 Removing and Replacing Components