HP (Hewlett-Packard) RP3410 Server User Manual


 
Additional Controls and Indicators
HP 9000 rp3410 and rp3440 servers can have up to three low-voltage differential (LVD), 3.5-inch
form factor hot-pluggable disk drives installed. These disk drives have LEDs that provide status
and activity information.
Hot-Pluggable Disk Drive Indicators
The disk drives have two LEDs per drive, as follows:
Status LED Not used on the HP 9000 rp3410 or rp3440 server.
Activity LED Flashing green and indicates disk drive activity.
This LED is directly controlled by the disk drive and turns on when a drive
is accessed.
Figure 1-9 shows the hot-pluggable disk drive LED indicators.
Figure 1-9 Hot-Pluggable Disk Drive LED Indicators
Table 1-8 lists the hot-pluggable disk drive LED definitions.
Table 1-8 Hot-Pluggable Disk Drive LED Definitions
DescriptionStateLED
Not usedNoneStatus LED
Reading and scanning hard driveFlashing greenActivity LED
Optional Removable Media Drive
HP 9000 rp3410 and rp3440 servers are delivered without a removable media drive. You can add
either a DVD or CD-RW/DVD drive. Each of these optional devices has one activity LED.
Figure 1-10 shows the DVD drive details.
Figure 1-10 DVD Drive
Table 1-9 lists the DVD drive LED definitions.
Table 1-9 DVD Drive LED Definitions
DescriptionStateLED
Drive is activeFlashing greenActivity LED
Controls, Ports, and LEDs 33