Filter
Top Products
Replacing the Resident System Board with a Replacement System Board
All A7136B, A9948A, and A9949A products within the documented serial number ranges were
shipped from the factory with an incorrect system setting product number.
CAUTION: A7137-69001, HP 9000 rp34x0, changing to your system settings.
If this procedure is not performed correctly, you will not be able to set your server up without
the help of an HP Customer Engineer.
Affected Serial Numbers:
• USL0804515 - USE4444KD3
• SG40909239 - SG44719451
• JPA0409004 - JPA0444016
• DE40900020 - DE44700079
For the life of the affected systems, the factory-programmed value must be maintained when
entering the system product number instead of the value on the system pull-out tag. Failure to
do so can cause licensed customer applications to fail.
Affected Product Numbers:
For the following product numbers, A7137A must be used when entering the system setting
product number, as detailed in step 5 of the following procedure:
A9948A - rp3440-1 Way 800 MHz Solution
A9949A - rp3440-1 Way 1 GHz Solution
A7136A must be used when entering the system setting product number for the A7136B - rp3410-1
Way Base server 800MHz Solution, as detailed in step 5 of the following procedure.
WARNING! Ensure that the server is powered off and all the power sources have been
disconnected from the server before removing or replacing a removable system drive.
Voltages are present at various locations within the server whenever an AC power source is
connected. This voltage is present even when the main power switch is in the off position.
Failure to observe this warning can result in personal injury or damage to equipment.
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server. Failure to properly complete
the steps in this procedure will result in erratic server behavior or server failure. For assistance
with this procedure contact your local HP Authorized Service Provider.
Before replacing the resident system board with the replacement system board (A7136-69001),
you must locate the pull-out tag that is on the chassis of your server. This provides you with the
system product number, system serial number, and key certificate number that you need to set
up the system board.
184 Removing and Replacing Components