Filter
Top Products
.........................................................................................................................................
1-4
Loading a single envelope
l To print a single envelope, use the Single-
Envelope Slot so you don’t have to remove the
paper from the Paper Tray.
l Load a single envelope as shown, address side
facing you and stamp edge down.
Loading multiple envelopes
l Pull the Document Tray forward and remove any
paper from the Paper Tray.
l Pinch and slide the right Paper Guide to the
envelope position inscribed on the Paper Tray.
l Load up to ten envelopes with the address side
facing you and the stamp edge down. Align the
right edge of the stack with the right Paper
Guide.
l Pinch and slide the left Paper Guide until it just
touches the left edge of the envelope stack.
l Push the Document Tray back until it rests
against the Paper Tray.
Loading transparencies
l Load transparencies (up to 50) with the adhesive-
strip down and facing away from you, and the
rough side toward you. The arrows on the adhe-
sive strip will be on the side of the transparency
away from you.