Filter
Top Products
4-20 Using the Universal Volume Manager GUI
Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide
• Preview button (lower right of the window)
When you click Preview, the Preview dialog box is displayed and you can
confirm the contents which was set in the list of the Port Operation
window. The contents displayed in the Preview dialog box have not been
applied to the local storage system, yet.
• Apply button
Applies the settings in the Preview dialog box to the local storage system.
When the settings are applied successfully, they are removed from the
Preview dialog box and the settings in blue and italics in the Port Operation
window is displayed normally.
When the settings are not applied, the error messages are displayed and
the settings in blue and italics remain displayed in the Port Operation
window. To refer to the error detail, click Preview to open the Preview
dialog box.
• Cancel button
Cancels all the settings in the Preview dialog box.
Port Operation Tree
The Port Operation tree is a tree on the left side of the Port Operation window
consisting of a tree and a drop-down list which is used to switch the display of
the tree.
The Port Operation tree consists of:
• Drop-down list
A drop-down list to change the items displayed in the Port Operation tree.
You can select Fibre from the drop-down list as a PCB type.
• Tree
The ports in the local storage system are displayed in the tree. The
contents displayed in the list (right of the window) switch corresponding to
the items clicked in this tree. For instance, when you click External in the
tree, only the ports that port attributes are set to external are displayed in
the Port Operation list.
– Subsystem: Nothing is displayed in the list when you select
Subsystem. Subsystem is selected, when you display the Port
Operation window.
– Port attribute: The following attributes are displayed:
– External: When you click External, the ports set to the external
port are displayed in the list. The external port is the port attribute
used for Universal Volume Manager. The external port does not
have the High Speed mode.
– Target: When you click Target, the ports set as the target port
are displayed in the list.