Filter
Top Products
iii
Declaration of Conformity
Standards to which Conformity is declared: FCC Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Responsible Party’s name: Hughes Network Systems, Inc.
Address: 11717 Exploration Lane, Germantown, MD 20876
Telephone: 1-866-DIRECWAY (347-3292)
Trade Name: HUGHES, DIRECWAY
Type of Equipment: Two-Way DIRECWAY System
Model Numbers: DW6002 (1032021-0002) DW6000 (1032021-0001)
The Two-Way DIRECWAY System (DW6002 and DW6000) complies with the Canadian ICES-003,
Class B standard.
For DW6002
Standards to which Conformity is declared: FCC Part 68
Part 68 Compliance -- This equipment (Two-Way DIRECWAY System: Model Numbers: DW6002)
complies with Part 68 of the FCC rules and requirements adopted by the ACTA. On the rear panel of
this equipment is a label that contains, among other information, a product identifier in the format
US:5L4DT00B1032021. If requested, this information must be provided to the Telephone Company.
The Two-Way DIRECWAY system needs to be installed according to the instructions. Coaxial cables
(RX and TX) need to be grounded at the point of entry. A plug and jack used to connect this equipment
to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant 26 Gauge telephone cord and modular plug is
provided with this product. It is required to be terminated with a plug type 605 or a FCC plug type 6
position for Australia.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified
Telecommunication Line Cord.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming
call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to the line, as determined by the total RENs, contact the
local Telephone Company. For products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format US:5L4DT##B1032021. The digits represented by the ##
are the REN without the decimal point (e.g., 00 is a REN of 0.0). For earlier products, the REN is
separately shown on the label.
If the Two-Way DIRECWAY System causes harm to the telephone network, the Telephone Company
will notify you in advance that temporary discontinuance of service may be required. But if advance
notice isn’t practical, the Telephone Company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The Telephone Company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this happens, the Telephone Company will provide
advance notice in order for you to make the necessary modifications to maintain uninterrupted service.