Filter
Top Products
DW6000 installation and components 1
DW6000 installation and components 1
Congratulations on your purchase of a DIRECWAY
®
DW6000! After your unit
has been professionally installed, you will be able to click on a browser and surf
the Internet. You will also be able to operate a local area network (LAN) after
you configure your computers with network interface cards (NICs), connect
them with Ethernet cable or via a wireless base station, and configure your
computers’ operating system network properties.
The DW6000 DIRECWAY System Control Center provides system
information, such as your Site ID, DW6000 IP (Internet Protocol) address, and
subnet mask, that is necessary for configuring your network. It also provides
help files. The System Control Center is explained in Chapter 2 – The
DIRECWAY System Control Center, on page 7.
Note: The instructions in this manual also apply to the enterprise-class DW6002.
The DW6002 includes all DW6000 functionality in addition to being equipped with
an internal telephone modem. The model number is on the back of the unit.
Contact information Should you have questions about your installation or DW6000, contact your
service provider.
System requirements If your DW6000 seems to not be working optimally, check that your computer
system meets the following requirements.
• Operating system
– PC: Windows 98 SE, Windows Me, Windows 2000, Windows XP
– MAC: 9.0 - 10.2 (excludes 10.0)
• Processor
– PC: Pentium II 333 Mhz or faster
– MAC: 300 Mhz or faster
• Memory
– PC: 64MB RAM, Windows 98SE and Me; 128MB RAM Windows 2000
and XP.
– MAC: 128MB
• Free hard drive space
– PC: 100MB
– MAC: 150MB