Filter
Top Products
DW6000 Troubleshooting 27
Check receive signal
The DW6000 will not function if satellite signals are not received properly.
1. At the Control Center, click on the
Reception Info indicator. The Reception
Info screen appears. See Figure 18.
2. In the
Receive Status row, check the Rx Code.
If the Rx Code is
The receiver is operational (RxCode 5) the
DW6000 is receiving signals properly. Proceed to the next troubleshooting
step.
If any other Rx Code appears, the DW6000 is not receiving signals
properly. Click on the Rx Code. Follow the troubleshooting procedure that
appears.
Check transmit signal
The DW6000 will not function if satellite signals are not transmitted properly.
1. At the Control Center, click on the
Transmission Info indicator. The
Transmission Info screen appears. See Figure 19.
2. In the
Transmit Status row, check the Tx Code.
Figure 18: Reception info