Filter
Top Products
Typical operating system settings 59
Configuring a
MacIntosh when
DHCP is enabled
Follow the steps below to configure a DW6000 with DHCP enabled on a
MacIntosh system.
1. Select
System Preferences from the Mac interface. The Systems
Preference menu appears.
2. Select the
Network icon. The Network screen appears.
3. Select the
Configure drop-down list. See Figure 55.
4. Select
Using DHCP. Notice the IP Address field grays out.
5. Select the Apply Now button. The Mac is now configured.
Figure 52: Select Manually from the Configure drop-down list
Figure 53: Mac Systems Preferences menu
Network icon