Filter
Top Products
Contents
vii
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Using IEEE 802.1x with Port Security 6-7
Using IEEE 802.1x with Voice VLAN Ports 6-8
Using IEEE 802.1x with VLAN Assignment 6-8
Using IEEE 802.1x with Guest VLAN 6-9
Using IEEE 802.1x with Wake-on-LAN 6-10
Unidirectional State 6-10
Bidirectional State 6-10
Configuring IEEE 802.1x Authentication 6-11
Default IEEE 802.1x Configuration 6-11
IEEE 802.1x Configuration Guidelines 6-12
Enabling IEEE 802.1x Authentication 6-13
Configuring the Switch-to-RADIUS-Server Communication 6-14
Configuring IEEE 802.1x Authentication Using a RADIUS Server 6-16
Enabling Periodic Re-Authentication 6-16
Manually Re-Authenticating a Client Connected to a Port 6-17
Changing the Quiet Period 6-17
Changing the Switch-to-Client Retransmission Time 6-18
Setting the Switch-to-Client Frame-Retransmission Number 6-19
Configuring the Host Mode 6-20
Configuring a Guest VLAN 6-20
Resetting the IEEE 802.1x Configuration to the Default Values 6-22
Configuring IEEE 802.1x Authentication 6-22
Configuring IEEE 802.1x Accounting 6-24
Displaying IEEE 802.1x Statistics and Status 6-25
CHAPTER
7 Configuring Interface Characteristics 7-1
Understanding Interface Types 7-1
Access Ports 7-2
Trunk Ports 7-2
Port-Based VLANs 7-3
EtherChannel Port Groups 7-3
Connecting Interfaces 7-4
Using the Interface Command 7-4
Procedures for Configuring Interfaces 7-5
Configuring a Range of Interfaces 7-6
Configuring and Using Interface-Range Macros 7-7
Configuring Ethernet Interfaces 7-9
Default Ethernet Interface Configuration 7-9
Configuring Interface Speed and Duplex Mode 7-10