Filter
Top Products
to avoid jams. Transparencies must withstand temperatures up to
356° F (180° C). Other specifications on overhead transparencies are
Thickness: 0.111 to 0.113 mm (4.37 to 4.45 mils)
Cutting Dimension Tolerance: +/-0.7 mm (0.031")
Cutting Angle: 90° (+/- 0.2°)
Transparencies are especially sensitive to a dirty paper path. If there
are shadows either on the top or the bottom of the sheets, see chap-
ter 5, “Printer Care,” of this manual for instructions on how to clean
the media path.
Adhesive label stock has pressure-sensitive (peel and stick) adhesive
backing. The procedure for feeding labels is almost the same as for
regular paper; however, you must use the face-up output bin.
Recommended labels have the following specifications:
Type: Use only labels recommended for laser printers, such
as Avery 5260. Adhesive label stock should have pressure-
sensitive (peel-and-stick) adhesive backing.
Weight: The printer supports 17-34 lb (64-128 g/m
2
) labels
when using manual feed.