Filter
Top Products
Applications use printer drivers to send appropriate commands to the
printer for requested tasks. If your application doesn’t have a QMS
1725 Print System driver, you can select a comparable PostScript
driver, such as another QMS driver or a LaserWriter driver. However,
comparable drivers may not allow you to access all of your printer's
features, such as 600x600 dpi printing, duplexing, or collating.
You can also use the PS Executive Series Utilities (shipped with your
printer) to control the printer from your host. See the README file on
the utilities disk for information on installing the utilities, and see the
utilities on-line help for details on using the software.
Printer commands (such as PostScript operators, QMS Document
Option Commands [DOCs], and HP PCL and HP-GL commands) can
enable job-specific features your application or page description lan-
guage can’t access. See the
QMS Crown Document Option Com-
mands
manual, for information on these commands. See appendix C,
“Document Option Commands,” of this manual for a list of DOCs this
printer supports.
Your printer is configured at the factory for most typical printing envi-
ronments, so most users don’t have to use the control panel often.
However, if you do need to change a printer setting for all print jobs
(not just on a per-job basis), you can do so through the control panel.
If you’re working in a shared printing environment, your system
administrator should be the only person to make changes through the
printer’s control panel.