IBM 1725 SLS Printer User Manual


 
paper jam message displays in the message window. Frequent jams
in any area indicate that area should be checked, repaired, or
cleaned. Repeated jams may also happen if you are using the wrong
weight paper. Jams can occur in the following areas:
Upper input bin
Lower input bin
Image transfer area
Fuser assembly area
Output area
Duplexing unit
After checking for and removing media from the areas indicated,
open and close the printer cover to clear the jam signal. If all the
jammed media has been removed, printing automatically restarts
when the cover is closed. If printing does not restart or if the printer
jams again, make sure that no pieces of media remain in the printer.
Follow these instructions to clear a media jam from the upper or lower
input bin:
1 Open the printer top cover and locate the transfer-guide
lock-tray.