IBM 1725 SLS Printer User Manual


 
3 Remove the toner cartridge and gently rock it from side to
side as you would when installing a new cartridge.
This redistributes toner inside the cartridge. Then, reinstall the
cartridge.
4 If steps 1, 2, and 3 do not solve the problem, install a new
cartridge.
1 Decrease print density by adjusting the print density control
lever inside the printer to the thin end of the wedge-shaped
scale.
2 Remove the toner cartridge and gently rock it from side to
side as you would when installing a new cartridge.
This redistributes toner inside the cartridge. Then, reinstall the
cartridge.
3 If steps 1 and 2 do not solve the problem, install a new toner
cartridge.
Install a new toner cartridge.
The media path may be dirty. Clean the media path area. See chapter
5 “Printer Care,” for more information.
Place a service call.