Filter
Top Products
If you need to cancel all of the configuration changes you have made,
you can reset all of the configuration settings to their factory defaults.
The Operator Control menu consists of the following submenus:
While it is usually preferable to select in your application the number
of copies you want to print, you can change the default number of
copies for all print jobs through the printer control panel.
Notes The printer must be restarted for changes to the Keypad
Language menu to take effect. You can either let the printer
restart automatically after you save the change and exit from
the Configuration menu, or you can wait for the change to take
effect the next time you manually turn on the printer.
Menu Administration/Miscellaneous/Restore Defaults
Choices Yes, No
Default No
Notes This process takes several minutes to complete.
Copies Collation
Orientation Inputbin
Outputbin Chain Inputbins
Manual Feed Size Def. Duplex
Tumble Duplex
Menu Operator Control/Copies
Choices 001-999
Default 001
Notes Sets the default number of copies for all subsequent print jobs.